College-wide Navigational Links | Go to Local Navigational Links
Local Navigational Links | Go to Main Content
Main Content | Go to Searching Tools

Entomology: UGA Honey Bee Program: Bees, Beekeeping, and Pollination

Getting Started: Processing Honey

Honey is sold as "extracted" honey - bottled, liquid honey that has been extracted from the combs; "comb" honey – honey still in its natural comb; and "chunk" honey – a bottled combination of extracted and comb.

Extracted Honey

Honey extracting equipment for the hobbyist is specialized and represents a one-time investment of about $500 for new equipment. Used equipment is often available at significant savings. These are the basic tools and procedures for extracting honey:

  1. Uncapping knife (Fig. 1) - A heated knife for slicing off the cappings from combs of honey.
  2. Uncapping tank (Fig. 2) - A container for receiving the cappings. Wet cappings fall onto a screen, and honey drips through to the bottom of the tank and out a spigot.
  3. Extractor (Fig. 3) - A drum containing a rotating wire basket. Uncapped combs are placed in the basket and the basket is turned by hand or by motor. Honey is flung out of the combs onto the sides of the tank and drains through a spigot.
  4. Storage tank (Fig. 4) - A large tank with a spigot, or "honey gate," at the bottom. As honey settles in the tank, air bubbles and small debris rise to the top and can be skimmed off, allowing honey that is bottled from the honey gate to be clear and attractive.
  5. Strainer (Fig. 5) - A mesh of coarse screen or cloth directly under the extractor spigot or on top of storage tank. This filters out large debris such as wax and dead bees.

Uncapping knife
Fig. 1

Uncapping tank
Fig. 2

Honey extractor
Fig. 3

 

Storage tank
Fig. 4

Strainer
Fig. 5

 

Sometimes extracted honey granulates. This is a natural process, and the honey is still perfectly edible. If bottled honey granulates, loosen the lid and place the jar in a pan of water on a stove. Heat and stir the honey until it re-liquifies.

top

Comb Honey

Comb honey requires little specialized equipment, so it is a good way for a new beekeeper to get started. Supply companies offer special comb honey supers for producing comb honey in round or square one-pound sections. "Cut-comb" honey is the easiest and least expensive honey to produce. With cut-comb, the entire comb is cut away from the frame then further cut into smaller sections and packaged in special plastic boxes. Regardless of these variations, all comb honey requires special extra-thin foundation. Freeze comb honey overnight before it is sold to kill any wax moth eggs and larvae.

top
 

Chunk Honey

Chunk honey is made by placing a piece of cut comb honey in a jar and filling up the rest of the jar with extracted honey
Fig. 6

Chunk honey is made by placing a piece of cut comb honey in a jar and filling up the rest of the jar with extracted honey (Fig. 6). Remember to freeze the comb honey first.

 

 

 

 

 

 

 

top

Wax Cappings

Wax cappings are a valuable by-product of extracting. After cappings have dripped dry, wash them in water to remove all honey. Melt the cappings, strain the wax through nylon and pour it into bread pans or a similar mold. Supply companies can render your beeswax bricks into new foundation at considerable savings.

top
Searching Tools | Go to Footer Information
Footer Information | Go to College-Wide Navigational Links
University of Georgia (UGA) College of Agricultural and Environmental Sciences (CAES)